3/8/2005 The
center section is already underway, with lots of machine work i,e,
drive shafts, landing gear (redone robarts, and home made) |
Here are some
more detailed pictures
|
3/13/2005 Nose Gear |
Most of the heavy
stuff is mounted |
Center section
is
33" wide & 30"
long |
Engine Shaft
|
Takes longer to
figure out what to do next and make the drawings than it does to
build. |
Soon as I get
the parts in the wing I can start putting the skins on
and start fiber glassing. |
3/27/05
Have to build a test stand to make sure that my drive shafts are going to
work.
|
Built the outer
wing panels
yesterday.
Page2 |